• TP-Link Portable 3G/4G Wireless N Router

    TP-TL-MR3020 is the ideal travel partner for people on the go. The 3G Router Mode enables you to plug in a 3G USB modem and share it wirelessly. Its Travel Router Mode (AP Mode) allows you to conveniently setup an internet connection utilizing a hotel WAN cable. Meanwhile, you can also use the switch on the side of the router to choose between Travel Router Mode, 3G Router Mode and WISP Client Router Mode based on your different requirements.

    ??? Share a 3G/4G* mobile connection, compatible with 120+ LTE/HSPA+/HSPA/UMTS/EVDO 3G/4G USB modems, tested in the field
    ??? Travel-size design, small and light enough to take on the road, enables users to share a 3G/4G* mobile connection wherever 3G/4G* coverage is available
    ??? Wireless speed is up to 150Mbps
    ??? Three modes available: 3G/4G* Router, WISP Client Router and Travel Router Mode (AP Mode)
    ??? With 3G/4G* and WAN failover back-up strategy, TP-TL-MR3020 can provide a sustained internet connection.

    * If your existing device does not support 4G sharing, please upgrade it to the latest firmware manually.
    * Find your firmware version: www.tp-link.com/en/article/?faqid=315


    or 4 payments of $19.75 with Afterpay

  • High Gain Antenna for PM45-4G

    The PM-ANTH3G high gain antenna can be used with the PM45-4G communicator to boost signal strength in areas where connection is poor, such a basements or other low-lying areas.

    Product features:
    ??? Dual band operation – 3G & 4G
    ??? Wall mounting bracket included
    ??? Weather resistant design
    ??? 3m fly lead included
    ??? 3-6dBi Gain – Depending on operating frequency


    or 4 payments of $42.25 with Afterpay

  • SafeDial Wireless Contact ID to 3G Communicator

    Solve your NBN alarm monitoring problems with the SafeDial Wireless GL453GIP Contact ID to 3G Communicator. This enables you to instantly connect your dialer alarm panel to your central station via the Telstra 3G mobile network. This unit also requires no extra equipment at the control room and you can carry over your existing 1345 number.

    Monthly SIM / Service charge applies. Contact your sales representative for more information.

    ??? Multicom, MultiPath wireless & IP module powered by Permaconn & Telstra mobile network 3G/GPRS SIM
    ??? 4hr simultaneous Integrity Polling on 3G/IP
    ??? Compatible with ALL control rooms
    ??? Interfaces with ANY contact ID alarm panel
    ??? No extra equipment required at control room
    ??? Does not incur additional GPRS monitoring fees from your control room
    ??? Carry over your existing 1345 number


    or 4 payments of $68.75 with Afterpay

  • Permaconn 4G PM45 Alarm Communicator

    The PM45-4G is a versatile alarm communicator that reports on 4G, GPRS and IP to the Central Station. This unit can interface with a range of alarm panels using Contact ID. Primary alarm path is IP, followed by 4G/GPRS in the event of a wired ethernet failure. If no IP connection exists the communicators will report on GPRS or 4G only.

    Additional Features:
    ??? Small size – Fits inside alarm panel enclosure and suitable for ATM & M2M applications
    ??? Secure VPN within Optus & Telstra networks – Dedicated for Permaconn events only
    ??? AES128 encryption for alarm data – Secure transmissions over the public internet
    ??? High speed RS232 Interface – Future development
    ??? Various diagnostic LEDs – Easy installation
    ??? Activate, commission and diagnose using Atlas – Seamless installation process
    ??? Three (3) dedicated paths of communication – Uptime in excess of 99.9%
    ??? Internal watchdog reset function – No unnecessary service call-outs
    ??? Monitors & reports dialler interface lead status – Panel dialler to Permaconn interface secure
    ??? AS/NZ2201.5:2008 compliance

    * Optional antenna available (sold separately).


    or 4 payments of $107.25 with Afterpay

  • NetComm Industrial 4G Wifi Router

    This intelligent NetComm Wireless 4G WiFi M2M Router (NTC-140W-02) provides real-time M2M (Machine-to-Machine) data connectivity. It creates reliable point-to-point or point-to-multi-point WAN connections for a variety of mission critical applications such as primary broadband, video surveillance, retail, payments, in-vehicle communications and business continuity.

    ??? Powerful 720Mhz ARM Cortex A8 processor with 128MByte DDR2 RAM
    ??? 256MB Flash memory storage (~120MB available on board space for user storage)
    ??? Embedded Linux & Software Development Kit (SDK)
    ??? 2 x 10/100/1000 Base-T Ethernet RJ45 ports with Auto MDIX
    ??? Micro USB 2.0 OTG interface with 0.5A supply capability
    ??? Profile managed packet data connections
    ??? NAT Disable for framed route configuration
    ??? Transparent bridge mode using PPPoE to allow the router to transparently forward Public WAN IP address to a downstream device
    ??? SIM Security Management (PIN configuration, enable and disable)
    ??? Embedded GPS receiver (1575.42Mhz)
    ??? SMA Connector for external passive or active GPS Antenna
    ??? High throughput and extended range 802.11n 2T2R WiFi with transmission speeds up to 300Mbps
    ??? Static Routing, RIP (v1/v2), Port Forwarding and DMZ
    ??? Dynamic DNS
    ??? VRRP for redundant router failover
    ??? PPTP Client for VPN connectivity to remote PPTP VPN Server
    ??? Web-based User Interface (HTTP/HTTPS) for full device status and configuration
    ??? Firmware Upgrade locally via LAN or remotely Over-The-Air (HTTP/ HTTPS, SNMP, TR-069)

Main Menu